COMPLETE PRODUCT LIST
“This is our full list of all possible steel material options, in Australia.
Ungar Metals stock the most common steel selections, for on the spot jobs.
We can order in any other size, usually for the next day.
Equal Angles
Are available in a wide variety of sizes. Manufactured in Australia
Stocks 300PLUS steel, which exceeds the minimum requirements of AS/NZS
Typical Uses
- Engineering Construction
- Manufacturing
- Mining Infrastructure
- Non-Residential Construction
- Residential Construction
- Transport & Storage
Features
- Available in a wide variety of sizes
- Exceeds the minimum requirements of AS/NZS 3679.1 – 300
- Up to 20% stronger for improved strength to weight ratios
- Requires no special pre-heating for welding
Relevant Standards
- AS/NZS 3679.1:2010
| Size (mm x mm) | Mass (kg/m) | Metres Per Tonne | Available Lengths (m) |
| 25 x 25 x 3 | 1.12 | 893 | 7.5 |
| 25 x 25 x 5 | 1.65 | 606 | 7.5 |
| 25 x 25 x 6 | 2.08 | 481 | 7.5 |
| 30 x 30 x 3 | 1.35 | 741 | 7.5 |
| 30 x 30 x 5 | 2.01 | 498 | 7.5 |
| 30 x 30 x 6 | 2.56 | 391 | 7.5 |
| 40 x 40 x 3 | 1.83 | 546 | 7.5, 9.0 |
| 40 x 40 x 5 | 2.73 | 366 | 7.5, 9.0 |
| 40 x 40 x 6 | 3.50 | 286 | 7.5, 9.0 |
| 50 x 50 x 3 | 2.31 | 433 | 7.5, 9.0 |
| 50 x 50 x 5 | 3.48 | 287 | 7.5, 9.0 |
| 50 x 50 x 6 | 4.46 | 224 | 7.5, 9.0 |
| 50 x 50 x 8 | 5.68 | 176 | 7.5, 9.0 |
| 55 x 55 x 5 | 3.84 | 260 | 7.5, 9.0 |
| 55 x 55 x 6 | 4.93 | 203 | 7.5, 9.0 |
| 65 x 65 x 5 | 4.56 | 219 | 7.5, 9.0 |
| 65 x 65 x 6 | 5.87 | 170 | 7.5, 9.0 |
| 65 x 65 x 8 | 7.51 | 133 | 7.5, 9.0 |
| 65 x 65 x 10 | 9.02 | 111 | 7.5, 9.0 |
| 75 x 75 x 5 | 5.27 | 190 | 9.0, 12.0 |
| 75 x 75 x 6 | 6.81 | 147 | 9.0, 12.0 |
| 75 x 75 x 8 | 8.73 | 115 | 9.0, 12.0 |
| 75 x 75 x 10 | 10.50 | 95 | 9.0, 12.0 |
| 90 x 90 x 6 | 8.22 | 122 | 9.0, 12.0 |
| 90 x 90 x 8 | 10.60 | 94 | 9.0, 12.0 |
| 90 x 90 x 10 | 12.70 | 79 | 9.0, 12.0 |
| 100 x 100 x 6 | 9.16 | 109 | 9.0, 12.0 |
| 100 x 100 x 8 | 11.80 | 85 | 9.0, 12.0 |
| 100 x 100 x 10 | 14.20 | 70 | 9.0, 12.0 |
| 100 x 100 x 12 | 17.70 | 57 | 9.0, 12.0 |
Unequal Angles
Are available in a wide variety of sizes. Manufactured in Australia, Ungar Metals proudly stocks 300PLUS steel, which exceeds the minimum requirements of AS/NZS 3679.1 – 300.
Typical Uses
- Engineering Construction
- Residential Construction
- Non-Residential Construction
- Mining Infrastructure
- Transport and Storage
- Manufacturing
Features
- Available in a wide variety of sizes
- Exceeds the minimum requirements of AS/NZS 3679.1 – 300
- Up to 20% stronger for improved strength to weight ratios
- Requires no special pre-heating for welding
Relevant Standards
- AS/NZS 3679.1
| Size (mm x mm) | Mass (kg/m) | Metres Per Tonne | Available Lengths (m) |
| 65 x 50 x 5 | 4.02 | 249 | 9.0 |
| 65 x 50 x 6 | 5.16 | 194 | 9.0 |
| 65 x 50 x 8 | 6.59 | 152 | 9.0 |
| 75 x 50 x 5 | 4.40 | 227 | 7.5, 9.0 |
| 75 x 50 x 6 | 5.66 | 177 | 7.5, 9.0 |
| 75 x 50 x 8 | 7.23 | 139 | 7.5, 9.0 |
| 100 x 75 x 6 | 7.98 | 125 | 9.0, 12.0 |
| 100 x 75 x 8 | 10.30 | 97 | 9.0, 12.0 |
| 100 x 75 x 10 | 12.40 | 81 | 9.0, 12.0 |
| 125 x 75 x 6 | 9.16 | 109 | 9.0, 12.0 |
| 125 x 75 x 8 | 11.80 | 85 | 9.0, 12.0 |
| 125 x 75 x 10 | 14.20 | 70 | 9.0, 12.0 |
| 125 x 75 x 12 | 17.70 | 57 | 9.0, 12.0 |
Flat Bar
is available in a wide variety of sizes. Manufactured in Australia, Ungar Metals proudly stocks 300PLUS steel, which exceeds the minimum requirements of AS/NZS 3679.1 – 300.
Typical Uses
- Engineering Construction
- Manufacturing
- Mining Infrastructure
- Non-Residential Construction
- Residential Construction
- Transport & Storage
Features
- Available in a wide variety of sizes
- Exceeds the minimum requirements of AS/NZS 3679.1 – 300
- Up to 20% stronger for improved strength to weight ratios
- Requires no special pre-heating for welding
- Additional grades available on request
Relevant Standards
- AS/NZS 3679.1:2010
- AS 1442:2007
- AS 1444:2007
- AS 1447:2007
| Edge | Size (mm x mm) | Mass (kg/m) | Metres Per Tonne | Standard Length (m) |
| Square | 20 x 3 | 0.47 | 2123 | 6.0 |
| Square | 20 x 5 | 0.79 | 1274 | 6.0 |
| Square | 20 x 6 | 0.94 | 1062 | 6.0 |
| Square | 20 x 10 | 1.57 | 637 | 6.0 |
| Square | 25 x 3 | 0.59 | 1695 | 6.0 |
| Square | 25 x 5 | 0.98 | 1019 | 6.0 |
| Square | 25 x 6 | 1.18 | 847 | 6.0 |
| Square | 25 x 8 | 1.57 | 637 | 6.0 |
| Square | 25 x 10 | 1.96 | 510 | 6.0 |
| Square | 25 x 12 | 2.36 | 424 | 6.0 |
| Square | 32 x 3 | 0.75 | 1333 | 6.0 |
| Square | 32 x 5 | 1.26 | 794 | 6.0 |
| Square | 32 x 6 | 1.51 | 662 | 6.0 |
| Square | 32 x 8 | 2.01 | 498 | 6.0 |
| Square | 32 x 10 | 2.51 | 398 | 6.0 |
| Square | 32 x 12 | 3.01 | 332 | 6.0 |
| Square | 40 x 3 | 0.94 | 1064 | 6.0 |
| Square | 40 x 5 | 1.57 | 637 | 6.0 |
| Square | 40 x 6 | 1.88 | 532 | 6.0 |
| Square | 40 x 8 | 2.51 | 398 | 6.0 |
| Square | 40 x 10 | 3.14 | 318 | 6.0 |
| Square | 40 x 12 | 3.77 | 265 | 6.0 |
| Square | 40 x 16 | 5.02 | 199 | 6.0 |
| Square | 40 x 20 | 6.28 | 159 | 6.0 |
| Square | 50 x 3 | 1.18 | 847 | 6.0 |
| Square | 50 x 5 | 1.96 | 510 | 6.0 |
| Square | 50 x 6 | 2.36 | 424 | 6.0 |
| Square | 50 x 8 | 3.14 | 318 | 6.0 |
| Square | 50 x 10 | 3.93 | 254 | 6.0 |
| Square | 50 x 12 | 4.71 | 212 | 6.0 |
| Square | 50 x 16 | 6.28 | 159 | 6.0 |
| Square | 50 x 20 | 7.85 | 127 | 6.0 |
| Square | 50 x 25 | 9.81 | 102 | 6.0 |
| Square | 65 x 3 | 1.53 | 654 | 6.0 |
| Square | 65 x 5 | 2.55 | 392 | 6.0 |
| Square | 65 x 6 | 3.06 | 327 | 6.0 |
| Square | 65 x 8 | 4.08 | 245 | 6.0 |
| Square | 65 x 10 | 5.10 | 196 | 6.0 |
| Square | 65 x 12 | 6.12 | 163 | 6.0 |
| Square | 65 x 16 | 8.16 | 123 | 6.0 |
| Square | 65 x 20 | 10.20 | 98 | 6.0 |
| Square | 65 x 25 | 12.80 | 78 | 6.0 |
| Square | 75 x 5 | 2.94 | 340 | 6.0 |
| Square | 75 x 6 | 3.53 | 283 | 6.0 |
| Square | 75 x 8 | 4.71 | 212 | 6.0 |
| Square | 75 x 10 | 5.89 | 170 | 6.0 |
| Square | 75 x 12 | 7.07 | 141 | 6.0 |
| Square | 75 x 16 | 9.42 | 106 | 6.0 |
| Square | 75 x 20 | 11.80 | 85 | 6.0 |
| Square | 75 x 25 | 14.70 | 68 | 6.0 |
| Square | 75 x 40 | 23.60 | 42 | 6.0 |
| Square | 90 x 5 | 3.53 | 283 | 6.0 |
| Square | 90 x 6 | 4.24 | 236 | 6.0 |
| Square | 90 x 8 | 5.65 | 177 | 6.0 |
| Square | 90 x 10 | 7.07 | 141 | 6.0 |
| Square | 90 x 12 | 8.48 | 118 | 6.0 |
| Square | 100 x 5 | 3.93 | 254 | 6.0 |
| Square | 100 x 6 | 4.71 | 212 | 6.0 |
| Square | 100 x 8 | 6.28 | 159 | 6.0 |
| Square | 100 x 10 | 7.85 | 127 | 6.0 |
| Square | 100 x 12 | 9.42 | 106 | 6.0 |
| Square | 100 x 16 | 12.60 | 79 | 6.0 |
| Square | 100 x 20 | 15.70 | 64 | 6.0 |
| Square | 100 x 25 | 19.60 | 51 | 6.0 |
| Square | 100 x 50 | 39.30 | 25 | 6.0 |
| Square | 110 x 6 | 5.18 | 193 | 6.0 |
| Square | 110 x 8 | 6.91 | 145 | 6.0 |
| Square | 110 x 10 | 8.64 | 116 | 6.0 |
| Square | 110 x 12 | 10.40 | 96 | 6.0 |
| Square | 130 x 5 | 5.10 | 196 | 6.0 |
| Square | 130 x 6 | 6.12 | 163 | 6.0 |
| Square | 130 x 8 | 8.16 | 123 | 6.0 |
| Square | 130 x 10 | 10.20 | 98 | 6.0 |
| Square | 130 x 12 | 12.20 | 82 | 6.0 |
| Square | 130 x 16 | 16.30 | 61 | 6.0 |
| Square | 130 x 20 | 20.40 | 49 | 6.0 |
| Square | 130 x 25 | 25.50 | 39 | 6.0 |
| Square | 150 x 5 | 5.89 | 170 | 6.0 |
| Square | 150 x 6 | 7.07 | 141 | 6.0 |
| Square | 150 x 8 | 9.42 | 106 | 6.0 |
| Square | 150 x 10 | 11.80 | 85 | 6.0 |
| Square | 150 x 12 | 14.10 | 71 | 6.0 |
| Square | 150 x 16 | 18.80 | 53 | 6.0 |
| Square | 150 x 20 | 23.60 | 42 | 6.0 |
| Square | 150 x 25 | 29.40 | 34 | 6.0 |
| Square | 150 x 50 | 58.90 | 17 | 6.0 |
| Square | 180 x 5 | 7.07 | 141 | 6.0 |
| Square | 180 x 6 | 8.48 | 118 | 6.0 |
| Square | 180 x 10 | 14.10 | 71 | 6.0 |
| Square | 180 x 12 | 17.00 | 59 | 6.0 |
| Square | 180 x 16 | 22.60 | 44 | 6.0 |
| Square | 180 x 20 | 28.30 | 35 | 6.0 |
| Square | 180 x 25 | 35.30 | 28 | 6.0 |
| Square | 200 x 6 | 9.42 | 106 | 6.0 |
| Square | 200 x 8 | 12.60 | 79 | 6.0 |
| Square | 200 x 10 | 15.70 | 64 | 6.0 |
| Square | 200 x 12 | 18.80 | 53 | 6.0 |
| Square | 200 x 16 | 25.10 | 40 | 6.0 |
| Square | 200 x 20 | 31.40 | 32 | 6.0 |
| Square | 200 x 25 | 39.30 | 25 | 6.0 |
| Square | 250 x 6 | 11.80 | 85 | 6.0 |
| Square | 250 x 8 | 15.70 | 64 | 6.0 |
| Square | 250 x 10 | 19.60 | 51 | 6.0 |
| Square | 250 x 12 | 23.60 | 42 | 6.0 |
| Square | 250 x 16 | 31.40 | 32 | 6.0 |
| Square | 250 x 20 | 39.30 | 25 | 6.0 |
| Square | 250 x 25 | 49.10 | 20 | 6.0 |
| Square | 300 x 6 | 14.10 | 71 | 6.0 |
| Square | 300 x 8 | 18.80 | 53 | 6.0 |
| Square | 300 x 10 | 23.60 | 42 | 6.0 |
| Square | 300 x 12 | 28.30 | 35 | 6.0 |
| Square | 300 x 16 | 37.70 | 27 | 6.0 |
| Square | 300 x 20 | 47.10 | 21 | 6.0 |
| Square | 300 x 25 | 58.90 | 17 | 6.0 |
| Round | 10 x 3 | 0.24 | 4132 | 4.0 |
| Round | 13 x 3 | 0.31 | 3185 | 4.0 |
| Round | 13 x 5 | 0.52 | 1912 | 4.0 |
| Round | 13 x 6 | 0.63 | 1592 | 4.0 |
| Round | 16 x 3 | 0.39 | 2590 | 4.0 |
| Round | 16 x 5 | 0.64 | 1552 | 4.0 |
| Round | 16 x 8 | 1.03 | 971 | 4.0 |
Square Bar
Is available in a wide variety of sizes. Manufactured in Australia, Ungar Metals proudly stocks 300PLUS steel, which exceeds the minimum requirements of AS/NZS 3679.1 – 300.
Typical Uses
- Engineering Construction
- Residential Construction
- Non-Residential Construction
- Mining Infrastructure
- Transport and Storage
- Manufacturing
Features
- Available in a wide variety of sizes
- Exceeds the minimum requirements of AS/NZS 3679.1 – 300
- Up to 20% stronger for improved strength to weight ratios
- Requires no special pre-heating for welding
- Additional grades available on request
Relevant Standards
- AS/NZS 3679.1
- AS 1442
- AS 1444
- AS 1447
| Size (mm x mm) | Mass (kg/m) | Metres Per Tonne | Available Lengths (m) |
| 10 x 10 | 0.81 | 1266 | 6.0 |
| 12 x 12 | 1.16 | 885 | 6.0 |
| 16 x 16 | 2.06 | 498 | 6.0 |
| 20 x 20 | 3.22 | 318 | 6.0 |
| 25 x 25 | 5.03 | 204 | 6.0 |
| 32 x 32 | 8.24 | 124 | 6.0 |
| 40 x 40 | 12.90 | 79 | 6.0 |
Round Bar
Is available in a wide variety of sizes. Manufactured in Australia, Ungar Metals proudly stocks 300PLUS steel, which exceeds the minimum requirements of AS/NZS 3679.1 – 300.
Typical Uses
- Engineering Construction
- Residential Construction
- Non-Residential Construction
- Mining Infrastructure
- Transport and Storage
- Manufacturing
Features
- Available in a wide variety of sizes
- Exceeds the minimum requirements of AS/NZS 3679.1 – 300
- Up to 20% stronger for improved strength to weight ratios
- Requires no special pre-heating for welding
- Additional grades available on request
Relevant Standards
- AS/NZS 3679.1
- AS 1442
- AS 1444
- AS 1447
| Size (mm x mm) | Mass (kg/m) | Metres Per Tonne | Available Lengths (m) |
| 10 | 0.64 | 1613 | 6.0 |
| 12 | 0.91 | 1124 | 6.0 |
| 13 | 1.07 | 962 | 6.0 |
| 14 | 1.24 | 826 | 6.0 |
| 16 | 1.62 | 633 | 6.0 |
| 18 | 2.05 | 500 | 6.0 |
| 20 | 2.53 | 405 | 6.0 |
| 22 | 3.05 | 336 | 6.0 |
| 24 | 3.64 | 282 | 6.0 |
| 27 | 4.61 | 222 | 6.0 |
| 30 | 5.69 | 180 | 6.0 |
| 33 | 6.88 | 149 | 6.0 |
| 36 | 8.19 | 125 | 6.0 |
| 39 | 9.61 | 107 | 6.0 |
| 42 | 11.20 | 92 | 6.0 |
| 45 | 12.80 | 80 | 6.0 |
| 48 | 14.60 | 70 | 6.0 |
| 50 | 15.80 | 65 | 6.0 |
| 56 | 19.80 | 52 | 6.0 |
| 60 | 22.80 | 45 | 6.0 |
| 65 | 26.70 | 38 | 6.0 |
| 75 | 35.60 | 29 | 6.0 |
| 80 | 40.50 | 25 | 6.0 |
| 90 | 51.10 | 20 | 6.0 |
| 100 | 63.20 | 16 | 6.0 |
| 110 | 76.70 | 13 | 6.0 |
| 120 | 91.20 | 11 | 6.0 |
| 130 | 108.00 | 10 | 6.0 |
| 140 | 124.00 | 8 | 6.0 |
| 150 | 142.00 | 7 | 6.0 |
| 160 | 162.00 | 6 | 6.0 |
| 170 | 183.00 | 6 | 6.0 |
| 180 | 206.00 | 5 | 6.0 |
| 190 | 229.00 | 4 | 6.0 |
| 200 | 253.00 | 4 | 6.0 |
Parallel Flange Channels
Are available in a variety of sizes. Manufactured in Australia, Ungar Metals proudly stocks 300PLUS steel, which exceeds the minimum requirements of AS/NZS 3679.1 – 300.
Typical Uses
- Engineering Construction
- Residential Construction
- Non-Residential Construction
- Mining Infrastructure
- Transport and Storage
- Manufacturing
Features
- Available in a wide variety of sizes
- Exceeds the minimum requirements of AS/NZS 3679.1 – 300
- Up to 20% stronger for improved strength to weight ratios
- Requires no special pre-heating for welding
Relevant Standards
- AS/NZS 3679.1
| Size (mm x mm) | Mass (kg/m) | Metres Per Tonne | Available Lengths (m) |
| 75 x 40 | 5.92 | 169 | 9.0, 12.0 |
| 100 x 50 | 8.33 | 120 | 9.0, 12.0 |
| 125 x 65 | 11.90 | 84 | 9.0, 12.0 |
Equal Angles
Are available in a wide variety of sizes. Manufactured in Australia, Ungar Metals proudly stocks 300PLUS steel, which exceeds the minimum requirements of AS/NZS 3679.1 – 300.
Typical Uses
- Engineering Construction
- Residential Construction
- Non-Residential Construction
- Mining Infrastructure
- Transport and Storage
- Manufacturing
Features
- Available in a wide variety of sizes
- Exceeds the minimum requirements of AS/NZS 3679.1 – 300
- Up to 20% stronger for improved strength to weight ratios
- Requires no special pre-heating for welding
Relevant Standards
- AS/NZS 3679.1
| Size (mm x mm) | Mass (kg/m) | Metres Per Tonne | Available Lengths (m) |
| 125 x 125 x 8 | 14.9 | 67 | 9.0, 10.5, 12.0, 13.5, 15.0 |
| 125 x 125 x 10 | 18.0 | 56 | 9.0, 10.5, 12.0, 13.5, 15.0 |
| 125 x 125 x 12 | 22.5 | 44 | 9.0, 10.5, 12.0, 13.5, 15.0 |
| 125 x 125 x 16 | 29.1 | 34 | 9.0, 10.5, 12.0, 13.5, 15.0 |
| 150 x 150 x 10 | 21.9 | 46 | 9.0, 10.5, 12.0, 13.5, 15.0 |
| 150 x 150 x 12 | 27.3 | 37 | 9.0, 10.5, 12.0, 13.5, 15.0 |
| 150 x 150 x 16 | 35.4 | 28 | 9.0, 10.5, 12.0, 13.5, 15.0 |
| 150 x 150 x 19 | 42.1 | 24 | 9.0, 10.5, 12.0, 13.5, 15.0 |
| 200 x 200 x 13 | 40.0 | 25 | 9.0, 10.5, 12.0, 13.5, 15.0 |
| 200 x 200 x 16 | 48.7 | 21 | 9.0, 10.5, 12.0, 13.5, 15.0 |
| 200 x 200 x 18 | 54.4 | 18 | 9.0, 10.5, 12.0, 13.5, 15.0 |
| 200 x 200 x 20 | 60.1 | 17 | 9.0, 10.5, 12.0, 13.5, 15.0 |
| 200 x 200 x 26 | 76.8 | 13 | 9.0, 10.5, 12.0, 13.5, 15.0 |
Parallel Flange Channels
Are available in a wide variety of sizes. Manufactured in Australia, Ungar Metals proudly stocks 300PLUS steel, which exceeds the minimum requirements of AS/NZS 3679.1 – 300.
Typical Uses
- Engineering Construction
- Residential Construction
- Non-Residential Construction
- Mining Infrastructure
- Transport and Storage
- Manufacturing
Features
- Available in a wide variety of sizes
- Exceeds the minimum requirements of AS/NZS 3679.1 – 300
- Up to 20% stronger for improved strength to weight ratios
- Requires no special pre-heating for welding
Relevant Standards
- AS/NZS 3679.1
| Size (mm x mm) | Mass (kg/m) | Metres Per Tonne | Available Lengths (m) |
| 150 x 75 | 17.7 | 56.5 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0 |
| 180 x 75 | 20.9 | 47.9 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0 |
| 200 x 75 | 22.9 | 43.7 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0 |
| 230 x 75 | 25.1 | 39.8 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0 |
| 250 x 90 | 35.5 | 28.2 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0 |
| 300 x 90 | 40.1 | 24.9 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0 |
| 380 x 100 | 55.2 | 18.1 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0 |
Taper Flange Beams
Are available in a wide variety of sizes. Ungar Metals proudly stocks 300PLUS steel, which exceeds the minimum requirements of AS/NZS 3679.1 – 300.
Typical Uses
- Engineering Construction
- Residential Construction
- Non-Residential Construction
- Mining Infrastructure
- Transport and Storage
- Manufacturing
Features
- Available in a wide variety of sizes
- Exceeds the minimum requirements of AS/NZS 3679.1 – 300
- Up to 20% stronger for improved strength to weight ratios
- Requires no special pre-heating for welding
Relevant Standards
- AS/NZS 3679.1
| Size (mm x mm) | Mass (kg/m) | Metres Per Tonne | Available Lengths (m) |
| 100 x 45 | 7.20 | 139 | 9.0, 12.0 |
| 125 x 65 | 13.10 | 76 | 9.0, 12.0 |
Unequal Angles
Are available in a wide variety of sizes. Manufactured in Australia, Ungar Metals proudly stocks 300PLUS steel, which exceeds the minimum requirements of AS/NZS 3679.1 – 300.
Typical Uses
- Engineering Construction
- Residential Construction
- Non-Residential Construction
- Mining Infrastructure
- Transport and Storage
- Manufacturing
Features
- Available in a wide variety of sizes
- Exceeds the minimum requirements of AS/NZS 3679.1 – 300
- Up to 20% stronger for improved strength to weight ratios
- Requires no special pre-heating for welding
Relevant Standards
- AS/NZS 3679.1
| Size (mm x mm) | Mass (kg/m) | Metres Per Tonne | Available Lengths (m) |
| 150 x 90 x 9 | 14.3 | 70 | 9.0, 10.5, 12.0, 13.5, 15.0 |
| 150 x 90 x 10 | 17.3 | 58 | 9.0, 10.5, 12.0, 13.5, 15.0 |
| 150 x 90 x 12 | 21.6 | 46 | 9.0, 10.5, 12.0, 13.5, 15.0 |
| 150 x 90 x 16 | 27.9 | 36 | 9.0, 10.5, 12.0, 13.5, 15.0 |
| 150 x 100 x 10 | 18.0 | 56 | 9.0, 10.5, 12.0, 13.5, 15.0 |
| 150 x 100 x 12 | 22.5 | 44 | 9.0, 10.5, 12.0, 13.5, 15.0 |
Universal Beams
Are available in a wide variety of sizes. Manufactured in Australia, Ungar Metals proudly stocks 300PLUS steel, which exceeds the minimum requirements of AS/NZS 3679.1 – 300.
Typical Uses
- Engineering Construction
- Residential Construction
- Non-Residential Construction
- Mining Infrastructure
- Transport and Storage
- Manufacturing
Features
- Available in a wide variety of sizes
- Exceeds the minimum requirements of AS/NZS 3679.1 – 300
- Up to 20% stronger for improved strength to weight ratios
- Requires no special pre-heating for welding
Relevant Standards
- AS/NZS 3679.1
| Metric Designation | Size (mm x mm) | Mass (kg/m) | Metres Per Tonne | Available Lengths (m) |
| 150 UB | 150 x 75 | 14.0 | 71 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5 |
| 155 x 75 | 18.0 | 56 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5 | |
| 180 UB | 173 x 90 | 16.1 | 62 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5 |
| 175 x 90 | 18.1 | 55 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5 | |
| 179 x 90 | 22.2 | 45 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5 | |
| 200 UB | 198 x 99 | 18.2 | 55 | 9.0, 10.5, 12.0, 13.5, 15.0 |
| 202 x 133 | 22.3 | 45 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0 | |
| 203 x 133 | 25.4 | 39 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0 | |
| 207 x 134 | 29.8 | 34 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0 | |
| 250 UB | 248 x 124 | 25.7 | 39 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0 |
| 252 x 146 | 31.4 | 32 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0 | |
| 256 x 146 | 37.3 | 27 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0 | |
| 310 UB | 298 x 149 | 32.0 | 31 | 9.0, 10.5, 12.0, 13.5, 15.0, 18.0 |
| 304 x 165 | 40.4 | 25 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0, 20.0 | |
| 307 x 166 | 46.2 | 22 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0, 20.0 | |
| 360 UB | 352 x 171 | 44.7 | 22 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0, 20.0 |
| 356 x 171 | 50.7 | 20 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0, 20.0 | |
| 359 x 172 | 56.7 | 18 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0, 20.0 | |
| 410 UB | 403 x 178 | 53.7 | 19 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0, 20.0 |
| 406 x 178 | 59.7 | 17 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0, 20.0 | |
| 460 UB | 454 x 190 | 67.1 | 15 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0, 20.0 |
| 457 x 190 | 74.6 | 13 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0, 20.0 | |
| 460 x 191 | 82.1 | 12 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0, 20.0 | |
| 530 UB | 528 x 209 | 82.0 | 12 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0, 20.0 |
| 533 x 209 | 92.4 | 11 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0, 20.0 | |
| 610 UB | 602 x 228 | 101.0 | 10 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0, 20.0 |
| 356 x 228 | 113.0 | 9 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0, 20.0 | |
| 612 x 229 | 125.0 | 8 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0, 20.0 |
Universal Columns
Are available in a wide variety of sizes. Manufactured in Australia, OneSteel Metalcentre proudly stocks 300PLUS steel, which exceeds the minimum requirements of AS/NZS 3679.1 – 300.
Typical Uses
- Engineering Construction
- Residential Construction
- Non-Residential Construction
- Mining Infrastructure
- Transport and Storage
- Manufacturing
Features
- Available in a wide variety of sizes
- Exceeds the minimum requirements of AS/NZS 3679.1 – 300
- Up to 20% stronger for improved strength to weight ratios
- Requires no special pre-heating for welding
Relevant Standards
- AS/NZS 3679.1
| Metric Designation | Size (mm x mm) | Mass (kg/m) | Metres Per Tonne | Available Lengths (m) |
| 100 UC | 97 x 99 | 14.8 | 68 | 9.0, 12.0, 15.0 |
| 150 UC | 152 x 152 | 23.4 | 43 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0 |
| 158 x 153 | 30.0 | 33 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0 | |
| 162 x 154 | 37.2 | 27 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0 | |
| 200 UC | 203 x 203 | 46.2 | 22 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0 |
| 206 x 204 | 52.2 | 19 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0 | |
| 210 x 205 | 59.5 | 17 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0 | |
| 250 UC | 254 x 254 | 72.9 | 14 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0, 20.0 |
| 260 x 256 | 89.5 | 11 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0, 20.0 | |
| 310 UC | 308 x 305 | 96.8 | 10 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0, 20.0 |
| 315 x 307 | 118.0 | 8 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0 | |
| 321 x 309 | 137.0 | 7 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0 | |
| 327 x 311 | 158.0 | 6 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0 |
Welded Beams
Are available in a range of sizes. Manufactured in Australia, OneSteel Metalcentre proudly stocks 300PLUS steel, which exceeds the minimum requirements of AS/NZS 3679.2 – 300.
Typical Uses
- Engineering Construction
- Residential Construction
- Non-Residential Construction
- Mining Infrastructure
- Transport and Storage
- Manufacturing
Features
- Available in a wide variety of sizes
- Exceeds the minimum requirements of AS/NZS 3679.2 – 300
- Up to 20% stronger for improved strength to weight ratios
- Requires no special pre-heating for welding
Relevant Standards
- AS/NZS 3679.2
| Metric Designation | Size (mm x mm) | Mass (kg/m) | Metres Per Tonne | Available Lengths (m) |
| 700 WB | 692 x 250 | 115 | 8.70 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0 |
| 700 x 250 | 130 | 7.69 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0 | |
| 710 x 250 | 150 | 6.67 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0 | |
| 716 x 250 | 173 | 5.78 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0 | |
| 800 WB | 792 x 250 | 122 | 8.20 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0 |
| 800 x 275 | 146 | 6.85 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0 | |
| 810 x 275 | 168 | 5.95 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0 | |
| 816 x 300 | 192 | 5.21 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0 | |
| 900 WB | 900 x 300 | 175 | 5.71 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0 |
| 910 x 350 | 218 | 4.59 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0 | |
| 916 x 400 | 257 | 3.89 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0 | |
| 924 x 400 | 282 | 3.55 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0 | |
| 1000 WB | 1000 x 300 | 215 | 4.65 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0 |
| 1010 x 350 | 258 | 3.88 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0 | |
| 1016 x 400 | 296 | 3.38 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0 | |
| 1024 x 400 | 322 | 3.11 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0 | |
| 1200 WB | 1170 x 275 | 249 | 4.02 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0 |
| 1170 x 350 | 278 | 3.60 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0 | |
| 1176 x 400 | 317 | 3.15 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0 | |
| 1184 x 400 | 342 | 2.92 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0 | |
| 1184 x 500 | 392 | 2.55 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0 | |
| 1192 x 500 | 423 | 2.36 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0 | |
| 1200 x 500 | 455 | 2.20 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0 |
Welded Columns
Welded Columns are available in a range of sizes. Manufactured in Australia, OneSteel Metalcentre proudly stocks 300PLUS steel, which exceeds the minimum requirements of AS/NZS 3679.2 – 300.
Typical Uses
- Engineering Construction
- Residential Construction
- Non-Residential Construction
- Mining Infrastructure
- Transport and Storage
- Manufacturing
Features
- Available in a wide variety of sizes
- Exceeds the minimum requirements of AS/NZS 3679.2 – 300
- Up to 20% stronger for improved strength to weight ratios
- Requires no special pre-heating for welding
Relevant Standards
- AS/NZS 3679.2
| Metric Designation | Size (mm x mm) | Mass (kg/m) | Metres Per Tonne | Available Lengths (m) |
| 500 WC | 490 x 500 | 228 | 4.39 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0 |
| 500 x 500 | 267 | 3.75 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0 | |
| 506 x 500 | 290 | 3.45 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0 | |
| 514 x 500 | 340 | 2.94 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0 | |
| 472 x 500 | 383 | 2.61 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0 | |
| 480 x 500 | 414 | 2.42 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0 | |
| 480 x 500 | 440 | 2.27 | 9.0, 10.5, 12.0, 13.5, 15.0, 16.5, 18.0
|
Structural Tube
DuraGal
DuraGal Square Hollow Sections (SHS) and Rectangular Hollow Sections (RHS) are high strength cold formed hollow sections that are hot dip galvanized to AS/NZS 4792:2006 and have a minimum average coating mass of 100 grams per square metre applied to the exterior of the section.
All DuraGal sections are available as C450PLUS structural tube. C450PLUS structural tube achieves the highest strength grade, C450L0, of AS/NZS 1163:2009, whilst maintaining the elongation and formability of C350L0, providing no loss of ductility or workability.
Typical Uses
- Engineering Construction
- Residential Construction
- Non-Residential Construction
- Mining Investment
- Transport and Storage
- Manufacturing
- Agriculture
Features
- 100 grams per square metre minimum average coating mass (externally)
- Available as C450PLUS structural tube
Relevant Standards
- AS/NZS 1163:2009
- AS/NZS 4792:2006
| Square Hollow Sections | |||||
| Size (mm x mm x mm) | Mass (kg/m) | Metres Per Tonne | Length / Pack | ||
| Standard | |||||
| 6.5 | 8.0 | 12.0 | |||
| 20 x 20 x 1.6 | 0.87 | 1150 | 96 | ||
| 25 x 25 x 1.6 | 1.12 | 890 | 100 | ||
| 25 x 25 x 2.0 | 1.36 | 733 | 100 | ||
| 25 x 25 x 2.5 | 1.64 | 610 | 100 | ||
| 25 x 25 x 3.0 | 1.89 | 529 | 100 | ||
| 30 x 30 x 1.6 | 1.38 | 727 | 100 | ||
| 30 x 30 x 2.0 | 1.68 | 596 | 100 | ||
| 35 x 35 x 1.6 | 1.63 | 615 | 100 | ||
| 35 x 35 x 2.0 | 1.99 | 502 | 100 | ||
| 35 x 35 x 2.5 | 2.42 | 412 | 64 | ||
| 35 x 35 x 3.0 | 2.83 | 353 | 64 | ||
| 40 x 40 x 1.6 | 1.88 | 533 | 81 | ||
| 40 x 40 x 2.0 | 2.31 | 434 | 81 | ||
| 40 x 40 x 2.5 | 2.82 | 355 | 64 | ||
| 40 x 40 x 3.0 | 3.30 | 303 | 64 | ||
| 40 x 40 x 4.0 | 4.09 | 244 | 49 | ||
| 50 x 50 x 1.6 | 2.38 | 420 | 64 | ||
| 50 x 50 x 2.0 | 2.93 | 300 | 64 | ||
| 50 x 50 x 2.5 | 3.60 | 278 | 49 | ||
| 50 x 50 x 3.0 | 4.25 | 236 | 49 | ||
| 50 x 50 x 4.0 | 5.35 | 187 | 36 | ||
| 50 x 50 x 5.0 | 6.39 | 156 | 30 | ||
| 65 x 65 x 1.6 | 3.13 | 319 | 49 | ||
| 65 x 65 x 2.0 | 3.88 | 258 | 42 | ||
| 65 x 65 x 2.5 | 4.78 | 209 | 42 | ||
| 65 x 65 x 3.0 | 5.66 | 177 | 36 | ||
| 65 x 65 x 4.0 | 7.23 | 138 | 30 | ||
| 65 x 65 x 5.0 | 8.75 | 114 | 25 | ||
| 75 x 75 x 2.0 | 4.50 | 222 | 36 | ||
| 75 x 75 x 2.5 | 5.56 | 180 | 30 | ||
| 75 x 75 x 3.0 | 6.60 | 152 | 30 | ||
| 75 x 75 x 3.0 | 7.53 | 133 | 25 | ||
| 75 x 75 x 4.0 | 8.49 | 118 | 25 | ||
| 75 x 75 x 5.0 | 10.30 | 97 | 20 | ||
| 75 x 75 x 6.0 | 12.00 | 83 | 16 | ||
| 89 x 89 x 3.5 | 9.07 | 110 | 20 | ||
| 89 x 89 x 5.0 | 12.50 | 80 | 16 | ||
| 89 x 89 x 6.0 | 14.70 | 68 | 12 | ||
| 100 x 100 x 2.0 | 6.07 | 165 | 20 | 20 | |
| 100 x 100 x 2.5 | 7.53 | 133 | 20 | ||
| 100 x 100 x 3.0 | 8.96 | 112 | 20 | 16 | |
| 100 x 100 x 4.0 | 11.60 | 86 | 16 | 12 | |
| 100 x 100 x 5.0 | 14.20 | 70 | 12 | 9 | |
| 100 x 100 x 6.0 | 16.70 | 60 | 12 | 9 | |
| Rectangular Hollow Sections | |||||
| Size (mm x mm x mm) | Mass (kg/m) | Metres Per Tonne | Length / Pack | ||
| Standard | |||||
| 6.5 | 8.0 | 12.0 | |||
| 50 x 20 x 1.6 | 1.63 | 615 | 96 | ||
| 50 x 20 x 2.0 | 1.99 | 502 | 96 | ||
| 50 x 20 x 2.5 | 2.42 | 412 | 72 | ||
| 50 x 20 x 3.0 | 2.83 | 353 | 72 | ||
| 50 x 25 x 1.6 | 1.75 | 571 | 96 | ||
| 50 x 25 x 2.0 | 2.15 | 465 | 96 | ||
| 50 x 25 x 2.5 | 2.62 | 382 | 72 | ||
| 50 x 25 x 3.0 | 3.07 | 326 | 60 | ||
| 65 x 35 x 2.0 | 2.93 | 341 | 54 | ||
| 65 x 35 x 2.5 | 3.60 | 278 | 54 | ||
| 65 x 35 x 3.0 | 4.25 | 236 | 45 | ||
| 65 x 35 x 4.0 | 5.35 | 187 | 45 | ||
| 75 x 25 x 1.6 | 2.38 | 420 | 65 | ||
| 75 x 25 x 2.0 | 2.93 | 341 | 65 | ||
| 75 x 25 x 2.5 | 3.60 | 278 | 48 | ||
| 75 x 50 x 1.6 | 3.01 | 332 | 54 | 54 | |
| 75 x 50 x 2.0 | 3.72 | 269 | 42 | 42 | |
| 75 x 50 x 2.5 | 4.58 | 218 | 42 | ||
| 75 x 50 x 3.0 | 5.42 | 184 | 35 | 24 | |
| 75 x 50 x 4.0 | 6.92 | 145 | 28 | 24 | |
| 75 x 50 x 5.0 | 8.35 | 120 | 24 | ||
| 75 x 50 x 6.0 | 9.67 | 103 | 20 | 16 | |
| 100 x 50 x 1.6 | 3.64 | 275 | 32 | 32 | |
| 100 x 50 x 2.0 | 4.50 | 222 | 32 | 32 | |
| 100 x 50 x 2.5 | 5.56 | 180 | 32 | 24 | |
| 100 x 50 x 3.0 | 6.60 | 152 | 32 | 24 | |
| 100 x 50 x 3.5 | 7.53 | 133 | 24 | 18 | |
| 100 x 50 x 4.0 | 8.49 | 118 | 24 | 18 | |
| 100 x 50 x 5.0 | 10.30 | 97 | 18 | 15 | |
| 100 x 50 x 6.0 | 12.00 | 83 | 15 | 12 | |
| 125 x 75 x 2.0 | 6.07 | 165 | 24 | ||
| 125 x 75 x 2.5 | 7.53 | 133 | 24 | 20 | |
| 125 x 75 x 3.0 | 8.96 | 112 | 20 | 20 | |
| 125 x 75 x 4.0 | 11.60 | 86 | 15 | 15 | |
| 125 x 75 x 5.0 | 14.20 | 70 | 15 | 12 | |
| 125 x 75 x 6.0 | 16.70 | 60 | 12 | 6 | |
| 150 x 50 x 2.0 | 6.07 | 165 | 21 | 21 | |
| 150 x 50 x 2.5 | 7.53 | 133 | 24 | ||
| 150 x 50 x 3.0 | 8.96 | 112 | 21 | 15 | |
| 150 x 50 x 4.0 | 11.60 | 86 | 15 | 15 | |
| 150 x 50 x 5.0 | 14.20 | 70 | 15 | 9 | |
DuraGal Clear
DuraGal Clear Square Hollow Sections (SHS) and Rectangular Hollow Sections (RHS) are high strength cold formed hollow sections that are hot dip galvanized to AS/NZS 4792:2006 and have a minimum avaerage coating mass of 100 grams per square metre applied to the interior and exterior of the sections.
DuraGal Clear sections are also prepared with a non-chromate passivation treatment which, when combined with appropriate pre-treatments, passes the permeability test specified in AS 4506:2005.
All DuraGal Clear sections are available as C450PLUS structural tube. C450PLUS structural tube achieves the highest strength grade, C450L0, of AS/NZS 1163:2009, whilst maintaining the elongation and formability of C350L0, providing no loss of ductility or workability.
Typical Uses
- Engineering Construction
- Residential Construction
- Non-Residential Construction
- Mining Investment
- Transport and Storage
- Manufacturing
- Agriculture
Features
- 100 grams per square metre minimum average coating mass (internally and externally)
- Non-chromate passivation treatment
- Available as C450PLUS structural tube
Relevant Standards
- AS/NZS 1163:2009
- AS/NZS 4792:2006
- AS 4506:2005
| Square Hollow Sections | |||||
| Size (mm x mm x mm) | Mass (kg/m) | Metres Per Tonne | Length / Pack | ||
| Standard | |||||
| 6.5 | 8.0 | 12.0 | |||
| 65 x 65 x 2.0 | 3.88 | 258 | 42 | ||
| 65 x 65 x 2.5 | 4.78 | 209 | 42 | ||
| 65 x 65 x 4.0 | 7.23 | 138 | 30 | ||
| 75 x 75 x 2.0 | 4.50 | 222 | 36 | ||
| 75 x 75 x 2.5 | 5.56 | 180 | 30 | ||
| 75 x 75 x 4.0 | 8.49 | 118 | 25 | ||
| 89 x 89 x 3.5 | 9.07 | 110 | 20 | ||
| 90 x 90 x 2.0 | 5.45 | 184 | 20 | ||
| 90 x 90 x 2.5 | 6.74 | 148 | 20 | ||
| 100 x 100 x 3.0 | 8.96 | 112 | 20 | 16 | |
| 100 x 100 x 4.0 | 11.60 | 86 | 16 | 12 | |
| Rectangular Hollow Sections | |||||
| Size (mm x mm x mm) | Mass (kg/m) | Metres Per Tonne | Length / Pack | ||
| Standard | |||||
| 6.5 | 8.0 | 12.0 | |||
| 75 x 50 x 1.6 | 3.01 | 332 | 54 | 54 | |
| 100 x 50 x 1.6 | 3.64 | 275 | 32 | 32 | |
| 100 x 50 x 2.0 | 4.50 | 222 | 32 | 32 | |
| 150 x 50 x 2.0 | 6.07 | 165 | 21 | 21 | |
| 150 x 50 x 3.0 | 8.96 | 112 | 21 | 15 | |
DuraGal Plus
DuraGal Plus Square Hollow Sections (SHS) and Rectangular Hollow Sections (RHS) are high strength cold formed hollow sections that are hot dip galvanized to AS/NZS 4792 and have a minimum average coating mass of 100 grams per square metre applied to the interior and exterior of the section for superior protection.
All DuraGal Plus sections are available as C450PLUS structural tube. C450PLUS structural tube achieves the highest strength grade, C450L0, of AS/NZS 1163, whilst maintaining the elongation and formability of C350L0, providing no loss of ductility or workability.
Typical Uses
- Engineering Construction
- Residential Construction
- Non-Residential Construction
- Mining Investment
- Transport and Storage
- Manufacturing
- Agriculture
Features
- 100 grams per square metre minimum average coating mass (internally and externally)
- Available as C450PLUS structural tube
Relevant Standards
- AS/NZS 1163:2009
- AS/NZS 4792:2006
| Square Hollow Sections | |||||
| Size (mm x mm x mm) | Mass (kg/m) | Metres Per Tonne | Length / Pack | ||
| Standard | |||||
| 6.5 | 8.0 | 12.0 | |||
| 20 x 20 x 1.6 | 0.87 | 1150 | 96 | ||
| 20 x 20 x 2.0 | 1.05 | 953 | 96 | ||
| 25 x 25 x 1.6 | 1.12 | 890 | 100 | ||
| 25 x 25 x 2.0 | 1.36 | 733 | 100 | ||
| 25 x 25 x 2.5 | 1.64 | 610 | 100 | ||
| 25 x 25 x 3.0 | 1.89 | 529 | 100 | ||
| 30 x 30 x 1.6 | 1.38 | 727 | 100 | ||
| 30 x 30 x 2.0 | 1.68 | 596 | 100 | ||
| 30 x 30 x 2.5 | 2.03 | 492 | 100 | ||
| 30 x 30 x 3.0 | 2.36 | 423 | 64 | ||
| 35 x 35 x 1.6 | 1.63 | 615 | 100 | ||
| 35 x 35 x 2.0 | 1.99 | 502 | 100 | ||
| 35 x 35 x 2.5 | 2.42 | 412 | 64 | ||
| 35 x 35 x 3.0 | 2.83 | 353 | 64 | ||
| 40 x 40 x 1.6 | 1.88 | 533 | 81 | ||
| 40 x 40 x 2.0 | 2.31 | 434 | 81 | ||
| 40 x 40 x 2.5 | 2.82 | 355 | 64 | ||
| 40 x 40 x 3.0 | 3.30 | 303 | 64 | ||
| 40 x 40 x 4.0 | 4.09 | 244 | 49 | ||
| 50 x 50 x 1.6 | 2.38 | 420 | 64 | ||
| 50 x 50 x 2.0 | 2.93 | 300 | 64 | ||
| 50 x 50 x 2.5 | 3.60 | 278 | 49 | ||
| 50 x 50 x 3.0 | 4.25 | 236 | 49 | ||
| 50 x 50 x 4.0 | 5.35 | 187 | 36 | ||
| 50 x 50 x 5.0 | 6.39 | 156 | 30 | ||
| 65 x 65 x 1.6 | 3.13 | 319 | 49 | ||
| 65 x 65 x 2.0 | 3.88 | 258 | 42 | ||
| 65 x 65 x 2.5 | 4.78 | 209 | 42 | ||
| 65 x 65 x 3.0 | 5.66 | 177 | 36 | ||
| 65 x 65 x 4.0 | 7.23 | 138 | 30 | ||
| 65 x 65 x 5.0 | 8.75 | 114 | 25 | ||
| 75 x 75 x 2.0 | 4.50 | 222 | 36 | ||
| 75 x 75 x 2.5 | 5.56 | 180 | 30 | ||
| 75 x 75 x 3.0 | 6.60 | 152 | 30 | ||
| 75 x 75 x 3.0 | 7.53 | 133 | 25 | ||
| 75 x 75 x 4.0 | 8.49 | 118 | 25 | ||
| 75 x 75 x 5.0 | 10.30 | 97 | 20 | ||
| 89 x 89 x 2.0 | 5.38 | 186 | 20 | ||
| 89 x 89 x 3.5 | 9.07 | 110 | 20 | ||
| 89 x 89 x 5.0 | 12.50 | 80 | 16 | ||
| 100 x 100 x 2.5 | 7.53 | 133 | 20 | ||
| 100 x 100 x 3.0 | 8.96 | 112 | 20 | 16 | |
| 100 x 100 x 4.0 | 11.60 | 86 | 16 | 12 | |
| 100 x 100 x 5.0 | 14.20 | 70 | 12 | 9 | |
| Rectangular Hollow Sections | |||||
| Size (mm x mm x mm) | Mass (kg/m) | Metres Per Tonne | Length / Pack | ||
| Standard | |||||
| 6.5 | 8.0 | 12.0 | |||
| 50 x 25 x 1.6 | 1.75 | 571 | 96 | ||
| 50 x 25 x 2.0 | 2.15 | 465 | 96 | ||
| 50 x 25 x 2.5 | 2.62 | 382 | 72 | ||
| 50 x 25 x 3.0 | 3.07 | 326 | 60 | ||
| 65 x 35 x 2.0 | 2.93 | 341 | 54 | ||
| 65 x 35 x 2.5 | 3.60 | 278 | 54 | ||
| 65 x 35 x 3.0 | 4.25 | 236 | 45 | ||
| 75 x 25 x 1.6 | 2.38 | 420 | 65 | ||
| 75 x 25 x 2.0 | 2.93 | 341 | 65 | ||
| 75 x 25 x 2.5 | 3.60 | 278 | 48 | ||
| 75 x 50 x 1.6 | 3.01 | 332 | 54 | 54 | |
| 75 x 50 x 2.0 | 3.72 | 269 | 42 | 42 | |
| 75 x 50 x 2.5 | 4.58 | 218 | 42 | ||
| 75 x 50 x 3.0 | 5.42 | 184 | 35 | 24 | |
| 75 x 50 x 4.0 | 6.92 | 145 | 28 | 24 | |
| 75 x 50 x 5.0 | 8.35 | 120 | 24 | ||
| 100 x 50 x 2.0 | 4.50 | 222 | 32 | 32 | |
| 100 x 50 x 2.5 | 5.56 | 180 | 32 | 24 | |
| 100 x 50 x 3.0 | 6.60 | 152 | 32 | 24 | |
| 100 x 50 x 3.5 | 7.53 | 133 | 24 | 18 | |
| 100 x 50 x 4.0 | 8.49 | 118 | 24 | 18 | |
| 100 x 50 x 5.0 | 10.30 | 97 | 18 | 15 | |
| 125 x 75 x 2.5 | 7.53 | 133 | 24 | 20 | |
| 125 x 75 x 3.0 | 8.96 | 112 | 20 | 20 | |
| 125 x 75 x 4.0 | 11.60 | 86 | 15 | 15 | |
| 125 x 75 x 5.0 | 14.20 | 70 | 15 | 12 | |
| 150 x 50 x 3.0 | 8.96 | 112 | 21 | 15 | |
| 150 x 50 x 4.0 | 11.60 | 86 | 15 | 15 | |
Hot Dip Gal
Hot Dip Gal Circular Hollow Sections (CHS) are high strength, cold formed hollow sections that are hot dip galvanized to AS/NZS 4792 and have a minimum average coating mass of 300 grams per square metre applied to both the interior and exterior of the section for superior protection.
Typical Uses
- Agriculture
- Engineering Construction
- Manufacturing
- Mining Investment
- Non-Residential Construction
- Residential Construction
- Transport & Storage
Features
- 300g/m2 minimum average coating mass (internally and externally) in accordance to AS/NZS 4792:2006
Relevant Standards
- AS/NZS 1163:2009
- AS 1074:1989
- AS/NZS 4792:2006
| Nominal Size (DN) | Section | Outside Diameter (mm) | Wall Thickness (mm) | Mass (kg/m) | Metres Per Tonne | Available Lengths | Pack Size (lns) |
| 15 | Medium | 2.6 | 1.24 | 806 | 6.5 | 217 | |
| 20 | Extra Light | 26.9 | 2.0 | 1.28 | 784 | 6.5 | 127 |
| Light | 2.3 | 1.44 | 694 | 6.5 | 127 | ||
| Medium | 2.6 | 1.60 | 623 | 6.5 | 127 | ||
| Heavy | 3.2 | 1.92 | 522 | 6.5 | 127 | ||
| 25 | Extra Light | 33.7 | 2.0 | 1.62 | 616 | 6.5 | 91 |
| Light | 2.6 | 2.05 | 487 | 6.5 | 91 | ||
| Medium | 3.2 | 2.47 | 404 | 6.5 | 91 | ||
| Heavy | 4.0 | 3.00 | 334 | 6.5 | 91 | ||
| 32 | Extra Light | 42.4 | 2.0 | 2.07 | 483 | 6.5 | 61 |
| Light | 2.6 | 2.63 | 381 | 6.5 | 61 | ||
| Medium | 3.2 | 3.18 | 315 | 6.5 | 61 | ||
| Heavy | 4.0 | 3.87 | 258 | 6.5 | 61 | ||
| 40 | Extra Light | 48.3 | 2.3 | 2.70 | 369 | 6.5 | 61 |
| Light | 2.9 | 3.33 | 300 | 6.5 | 61 | ||
| Medium | 3.2 | 3.65 | 274 | 6.5 | 61 | ||
| Heavy | 4.0 | 4.46 | 224 | 6.5 | 61 | ||
| 50 | Extra Light | 60.3 | 2.3 | 3.40 | 294 | 6.5 | 37 |
| Light | 2.9 | 4.21 | 237 | 6.5 | 37 | ||
| Medium | 3.6 | 5.14 | 195 | 6.5 | 37 | ||
| Heavy | 4.5 | 6.30 | 159 | 6.5 | 37 | ||
| 65 | Extra Light | 76.1 | 2.3 | 4.33 | 231 | 6.5 | 37 |
| Light | 3.2 | 5.89 | 170 | 6.5 | 37 | ||
| Medium | 3.6 | 6.56 | 152 | 6.5 | 37 | ||
| Heavy | 4.5 | 8.07 | 124 | 6.5 | 37 | ||
| 80 | Extra Light | 88.9 | 2.6 | 5.70 | 176 | 6.5 | 19 |
| Light | 3.2 | 6.92 | 144 | 6.5 | 19 | ||
| Medium | 4.0 | 8.53 | 117 | 6.5 | 19 | ||
| Heavy | 5.0 | 10.50 | 95.3 | 6.5 | 19 | ||
| 90 | Extra Light | 101.6 | 2.6 | 6.53 | 153 | 6.5 | 19 |
| Light | 3.2 | 7.95 | 126 | 6.5 | 19 | ||
| Medium | 4.0 | 9.81 | 102 | 6.5 | 19 | ||
| Heavy | 5.0 | 12.10 | 82.7 | 6.5 | 19 | ||
| 100 | Extra Light | 114.3 | 3.2 | 8.98 | 111 | 6.5 | 19 |
| Light | 3.6 | 10.00 | 99.6 | 6.5 | 19 | ||
| Medium | 4.5 | 12.40 | 80.8 | 6.5 | 19 | ||
| Heavy | 5.4 | 14.70 | 68.1 | 6.5 | 19 | ||
| 125 | Extra Light | 139.7 | 3.0 | 10.40 | 96.4 | 6.5 | 13 |
| Light | 3.5 | 12.00 | 83.2 | 6.5 | 13 | ||
| Medium | 5.0 | 16.90 | 59.3 | 6.5 | 13 | ||
| Heavy | 5.4 | 18.10 | 55.2 | 6.5 | 13 | ||
| 150 | Extra Light | 165.1 | 3.0 | 12.30 | 81.3 | 6.5 | 10 |
| Light | 3.5 | 14.30 | 70.2 | 6.5 | 10 | ||
| Medium | 5.0 | 20.00 | 49.9 | 6.5 | 10 | ||
| Heavy | 5.4 | 21.60 | 46.4 | 6.5 | 10 |
Black
Black Circular Hollow Sections (CHS) are high strength, cold formed hollow sections, coated with a mineral based finish that is easily removed by an alkali solution or kerosene.
Unless used for benign corrosion environments, the coating will need to be removed for further priming and top coating. Black CHS can be fabricated using normal workshop techniques and standard pre-treatment processes will easily prepare the product prior to galvanizing.
Typical Uses
- Agriculture
- Engineering Construction
- Manufacturing
- Mining Investment
- Non-Residential Construction
- Residential Construction
- Transport & Storage
Features
- Mineral based finish, which can be easily removed prior to fabrication
Relevant Standards
- AS/NZS 1163:2009
| Nominal Size (DN) | Section | Outside Diameter (mm) | Wall Thickness (mm) | Mass (kg/m) | Metres Per Tonne | Available Lengths | Pack Size (lns) |
| 25 | Extra Light | 33.7 | 2.0 | 1.56 | 640 | 6.5 | 91 |
| Light | 2.6 | 1.99 | 501 | 6.5 | 91 | ||
| Medium | 3.2 | 2.41 | 414 | 6.5 | 91 | ||
| Heavy | 4.0 | 2.94 | 340 | 6.5 | 91 | ||
| 32 | Extra Light | 42.4 | 2.0 | 1.99 | 502 | 6.5 | 61 |
| Light | 2.6 | 2.55 | 392 | 6.5 | 61 | ||
| Medium | 3.2 | 3.10 | 322 | 6.5 | 61 | ||
| Heavy | 4.0 | 3.80 | 263 | 6.5 | 61 | ||
| 40 | Extra Light | 48.3 | 2.3 | 2.61 | 382 | 6.5 | 61 |
| Light | 2.9 | 3.25 | 308 | 6.5 | 61 | ||
| Medium | 3.2 | 3.57 | 280 | 6.5 | 61 | ||
| Heavy | 4.0 | 4.38 | 228 | 6.5 | 61 | ||
| Extra Heavy | 5.4 | 5.71 | 175 | 6.5 | 61 | ||
| 50 | Extra Light | 60.3 | 2.3 | 3.29 | 304 | 6.5 | 37 |
| Light | 2.9 | 4.11 | 244 | 6.5 | 37 | ||
| Medium | 3.6 | 5.03 | 199 | 6.5 | 37 | ||
| Heavy | 4.5 | 6.19 | 161 | 6.5 | 37 | ||
| Extra Heavy | 5.4 | 7.31 | 137 | 6.5 | 37 | ||
| 65 | Extra Light | 76.1 | 2.3 | 4.19 | 239 | 6.5 | 37 |
| Light | 3.2 | 5.75 | 174 | 6.5 | 37 | ||
| Medium | 3.6 | 6.43 | 156 | 6.5 | 37 | ||
| Heavy | 4.5 | 7.93 | 126 | 6.5 | 37 | ||
| Extra Heavy | 5.9 | 10.20 | 97.9 | 6.5 | 37 | ||
| 80 | Extra Light | 88.9 | 2.6 | 5.53 | 181 | 6.5 | 19 |
| Light | 3.2 | 6.76 | 148 | 6.5 | 19 | ||
| Medium | 4.0 | 8.37 | 120 | 6.5 | 19 | ||
| Heavy | 5.0 | 10.30 | 96.8 | 6.5 | 19 | ||
| Extra Heavy | 5.9 | 12.10 | 82.8 | 6.5 | 19 | ||
| 90 | Extra Light | 101.6 | 2.6 | 6.35 | 158 | 6.5 | 19 |
| Light | 3.2 | 7.77 | 129 | 6.5 | 19 | ||
| Medium | 4.0 | 9.63 | 104 | 6.5 | 19 | ||
| Heavy | 5.0 | 11.90 | 84 | 6.5 | 19 | ||
| 100 | Extra Light | 114.3 | 3.2 | 8.77 | 114 | 6.5 | 19 |
| Light | 3.6 | 9.83 | 102 | 6.5 | 19 | ||
| Medium | 4.5 | 12.2 | 82.2 | 6.5 | 19 | ||
| Heavy | 5.4 | 14.5 | 69.1 | 6.5 | 19 | ||
| 125 | Extra Light | 139.7 | 3.0 | 10.1 | 98.9 | 6.5 | 13 |
| Light | 3.5 | 11.8 | 85.1 | 6.5 | 13 | ||
| Medium | 5.0 | 16.6 | 60.2 | 6.5 | 13 | ||
| Heavy | 5.4 | 17.9 | 55.9 | 6.5 | 13 | ||
| 150 | Extra Light | 165.1 | 3.0 | 12.0 | 83.4 | 6.5 | 10 |
| Light | 3.5 | 13.9 | 71.7 | 6.5 | 10 | ||
| Medium | 5.0 | 19.7 | 50.7 | 6.5 | 10 | ||
| Heavy | 5.4 | 21.3 | 47.0 | 6.5 | 10 |
DuraGal
DuraGal Circular Hollow Sections (CHS) are high strength, cold formed hollow sections that are hot dip galvanized to AS/NZS 4792:2006 and have a minimum average coating mass of 100 grams per square metre applied to the exterior of the section.
Typical Uses
- Agriculture
- Engineering Construction
- Manufacturing
- Mining Investment
- Non-Residential Construction
- Residential Construction
- Transport & Storage
Features
- 100g/m2 minimum average coating mass in accordance to AS/NZS 4792:2006
Relevant Standards
- AS/NZS 1163:2009
- AS/NZS 4792:2006
Nominal Size (DN) Outside Diameter (mm) Wall Thickness (mm) Mass (kg/m) Metres Per Tonne Available Lengths (m) Pack Size (lns) 20 26.9 2.0 1.23 814 6.5 127 25 33.7 2.0 1.56 640 6.5 91 32 42.4 2.0 1.99 502 6.5 61 40 48.3 2.3 2.61 383 6.5 61 50 60.3 2.3 3.29 304 6.5 37 65 76.1 2.3 4.19 212 6.5 37
DuraGal Plus
DuraGal Plus Circular Hollow Sections (CHS) are high strength, cold formed hollow sections that are hot dip galvanized to AS/NZS 4792 and have a minimum average coating mass of 100 grams per square metre applied to both the interior and exterior of the section for superior protection.
Typical Uses
- Agriculture
- Engineering Construction
- Manufacturing
- Mining Investment
- Non-Residential Construction
- Residential Construction
- Transport & Storage
Features
- 100gm/2 minimum average coating mass (internally and externally) in accordance to AS/NZS 4792:2006
Relevant Standards
- AS/NZS 1163:2009
- AS/NZS 4792:2006
| Nominal Size (DN) | Outside Diameter (mm) | Wall Thickness (mm) | Mass (kg/m) | Metres Per Tonne | Available Lengths | Pack Size (lns) |
| 20 | 26.9 | 2.0 | 1.23 | 814 | 6.5 | 127 |
| 25 | 33.7 | 2.0 | 1.56 | 640 | 6.5 | 91 |
| 32 | 42.4 | 2.0 | 1.99 | 502 | 6.5 | 61 |
| 40 | 48.3 | 2.3 | 2.61 | 383 | 6.5 | 61 |
| 50 | 60.3 | 2.3 | 3.29 | 304 | 6.5 | 37 |
Painted
Painted Circular Hollow Sections (CHS) are high strength, cold formed hollow sections that are primer painted for protection during storage and handling. DuraPrimed primer paint for tubular steel products has been developed specifically to save you time and money without compromising quality.
Typical Uses
- Agriculture
- Engineering Construction
- Manufacturing
- Mining Investment
- Non-Residential Construction
- Residential Construction
- Transport & Storage
Features
- Alkyd modified acrylic primer painted at an average of 8-10 microns
Relevant Standards
- AS/NZS 1163:2009
- AS 1074:1989
| Nominal Size (DN) | Section | Outside Diameter (mm) | Wall Thickness (mm) | Mass (kg/m) | Metres Per Tonne | Available Lengths | Pack Size (lns) |
| 15 | Medium | 2.6 | 1.21 | 830 | 6.5 | 217 | |
| 20 | Extra Light | 26.9 | 2.0 | 1.23 | 814 | 6.5 | 127 |
| Light | 2.3 | 1.40 | 717 | 6.5 | 127 | ||
| Medium | 2.6 | 1.87 | 642 | 6.5 | 127 | ||
| Heavy | 3.2 | 2.26 | 535 | 6.5 | 127 | ||
| Extra Heavy | 4.0 | 443 | 6.5 | 127 | |||
| 25 | Extra Light | 33.7 | 2.0 | 1.56 | 640 | 6.5 | 91 |
| Light | 2.6 | 1.99 | 501 | 6.5 | 91 | ||
| Medium | 3.2 | 2.41 | 414 | 6.5 | 91 | ||
| Heavy | 4.0 | 2.94 | 340 | 6.5 | 91 | ||
| 32 | Extra Light | 42.4 | 2.0 | 1.99 | 502 | 6.5 | 61 |
| Light | 2.6 | 2.55 | 392 | 6.5 | 61 | ||
| Medium | 3.2 | 3.10 | 322 | 6.5 | 61 | ||
| Heavy | 4.0 | 3.80 | 263 | 6.5 | 61 | ||
| 40 | Extra Light | 48.3 | 2.3 | 2.61 | 382 | 6.5 | 61 |
| Light | 2.9 | 3.25 | 308 | 6.5 | 61 | ||
| Medium | 3.2 | 3.57 | 280 | 6.5 | 61 | ||
| Heavy | 4.0 | 4.38 | 228 | 6.5 | 61 | ||
| Extra Heavy | 5.4 | 5.71 | 175 | 6.5 | 61 | ||
| 50 | Extra Light | 60.3 | 2.3 | 3.29 | 304 | 6.5 | 37 |
| Light | 2.9 | 4.11 | 244 | 6.5 | 37 | ||
| Medium | 3.6 | 5.03 | 199 | 6.5 | 37 | ||
| Heavy | 4.5 | 6.19 | 161 | 6.5 | 37 | ||
| Extra Heavy | 5.4 | 7.31 | 137 | 6.5 | 37 | ||
| 65 | Extra Light | 76.1 | 2.3 | 4.19 | 239 | 6.5 | 37 |
| Light | 3.2 | 5.75 | 174 | 6.5 | 37 | ||
| Medium | 3.6 | 6.43 | 156 | 6.5 | 37 | ||
| Heavy | 4.5 | 7.93 | 126 | 6.5 | 37 | ||
| Extra Heavy | 5.9 | 10.20 | 97.9 | 6.5 | 37 | ||
| 80 | Extra Light | 88.9 | 2.6 | 5.53 | 181 | 6.5 | 19 |
| Light | 3.2 | 6.76 | 148 | 6.5 | 19 | ||
| Medium | 4.0 | 8.37 | 120 | 6.5 | 19 | ||
| Heavy | 5.0 | 10.30 | 96.8 | 6.5 | 19 | ||
| Extra Heavy | 5.9 | 12.10 | 82.8 | 6.5 | 19 | ||
| 90 | Extra Light | 101.6 | 2.6 | 6.35 | 158 | 6.5 | 19 |
| Light | 3.2 | 7.77 | 129 | 6.5 | 19 | ||
| Medium | 4.0 | 9.63 | 104 | 6.5 | 19 | ||
| Heavy | 5.0 | 11.90 | 84 | 6.5 | 19 | ||
| 100 | Extra Light | 114.3 | 3.2 | 8.77 | 114 | 6.5 | 19 |
| Light | 3.6 | 9.83 | 102 | 6.5 | 19 | ||
| Medium | 4.5 | 12.2 | 82.2 | 6.5 | 19 | ||
| Heavy | 5.4 | 14.5 | 69.1 | 6.5 | 19 | ||
| 125 | Extra Light | 139.7 | 3.0 | 10.1 | 98.9 | 6.5 | 13 |
| Light | 3.5 | 11.8 | 85.1 | 6.5 | 13 | ||
| Medium | 5.0 | 16.6 | 60.2 | 6.5 | 13 | ||
| Heavy | 5.4 | 17.9 | 55.9 | 6.5 | 13 | ||
| 150 | Extra Light | 165.1 | 3.0 | 12.0 | 83.4 | 6.5 | 10 |
| Light | 3.5 | 13.9 | 71.7 | 6.5 | 10 | ||
| Medium | 5.0 | 19.7 | 50.7 | 6.5 | 10 | ||
| Heavy | 5.4 | 21.3 | 47.0 | 6.5 | 10 |
Painted
Painted Square Hollow Sections (SHS) and Rectangular Hollow Sections (RHS) are high strength cold formed hollow sections that are primer painted for protection during storage and handling. DuraPrimed primer paint for tubular steel products has been developed specifically to save you time and money without compromising quality.
All DuraPrimed sections are available as C450PLUS structural tube. C450PLUS structural tube achieves the highest strength grade, C450L0, of AS/NZS 1163, whilst maintaining the elongation and formability of C350L0, providing no loss of ductility or workability.
Typical Uses
- Engineering Construction
- Residential Construction
- Non-Residential Construction
- Mining Investment
- Transport and Storage
- Manufacturing
- Agriculture
Features
- Alkyd modified acrylic primer painted at an average of 8-10 microns
Relevant Standards
- AS/NZS 1163
| Square Hollow Sections | |||||
| Size (mm x mm x mm) | Mass (kg/m) | Metres Per Tonne | Length / Pack | ||
| Standard | |||||
| 6.5 | 8.0 | 12.0 | |||
| 20 x 20 x 1.6 | 0.87 | 1150 | 96 | ||
| 20 x 20 x 2.0 | 1.05 | 953 | 96 | ||
| 25 x 25 x 1.6 | 1.12 | 890 | 100 | ||
| 25 x 25 x 2.0 | 1.36 | 733 | 100 | ||
| 25 x 25 x 2.5 | 1.64 | 610 | 100 | ||
| 25 x 25 x 3.0 | 1.89 | 529 | 100 | ||
| 30 x 30 x 1.6 | 1.38 | 727 | 100 | ||
| 30 x 30 x 2.0 | 1.68 | 596 | 100 | ||
| 30 x 30 x 2.5 | 2.03 | 492 | 100 | ||
| 30 x 30 x 3.0 | 2.36 | 423 | 64 | ||
| 35 x 35 x 1.6 | 1.63 | 615 | 100 | ||
| 35 x 35 x 2.0 | 1.99 | 502 | 100 | ||
| 35 x 35 x 2.5 | 2.42 | 412 | 64 | ||
| 35 x 35 x 3.0 | 2.83 | 353 | 64 | ||
| 40 x 40 x 1.6 | 1.88 | 533 | 81 | ||
| 40 x 40 x 2.0 | 2.31 | 434 | 81 | ||
| 40 x 40 x 2.5 | 2.82 | 355 | 64 | ||
| 40 x 40 x 3.0 | 3.30 | 303 | 64 | ||
| 40 x 40 x 4.0 | 4.09 | 244 | 49 | ||
| 50 x 50 x 1.6 | 2.38 | 420 | 64 | ||
| 50 x 50 x 2.0 | 2.93 | 300 | 64 | ||
| 50 x 50 x 2.5 | 3.60 | 278 | 49 | ||
| 50 x 50 x 3.0 | 4.25 | 236 | 49 | ||
| 50 x 50 x 4.0 | 5.35 | 187 | 36 | ||
| 50 x 50 x 5.0 | 6.39 | 156 | 30 | ||
| 65 x 65 x 1.6 | 3.13 | 319 | 49 | ||
| 65 x 65 x 2.0 | 3.88 | 258 | 42 | ||
| 65 x 65 x 2.5 | 4.78 | 209 | 42 | ||
| 65 x 65 x 3.0 | 5.66 | 177 | 36 | ||
| 65 x 65 x 4.0 | 7.23 | 138 | 30 | ||
| 65 x 65 x 5.0 | 8.75 | 114 | 25 | ||
| 75 x 75 x 2.0 | 4.50 | 222 | 36 | ||
| 75 x 75 x 2.5 | 5.56 | 180 | 30 | ||
| 75 x 75 x 3.0 | 6.60 | 152 | 30 | ||
| 75 x 75 x 3.0 | 7.53 | 133 | 25 | ||
| 75 x 75 x 4.0 | 8.49 | 118 | 25 | ||
| 75 x 75 x 5.0 | 10.30 | 97 | 20 | ||
| 75 x 75 x 6.0 | 12.00 | 83 | 16 | ||
| 89 x 89 x 3.5 | 9.07 | 110 | 20 | ||
| 89 x 89 x 5.0 | 12.50 | 80 | 16 | ||
| 89 x 89 x 6.0 | 14.70 | 68 | 12 | ||
| 90 x 90 x 2.0 | 5.45 | 184 | 20 | ||
| 90 x 90 x 2.5 | 6.74 | 148 | 20 | ||
| 100 x 100 x 2.0 | 6.07 | 165 | 20 | 20 | |
| 100 x 100 x 2.5 | 7.53 | 133 | 20 | ||
| 100 x 100 x 3.0 | 8.96 | 112 | 20 | 16 | |
| 100 x 100 x 4.0 | 11.60 | 86 | 16 | 12 | |
| 100 x 100 x 5.0 | 14.20 | 70 | 12 | 9 | |
| 100 x 100 x 6.0 | 16.70 | 60 | 12 | 9 | |
| 100 x 100 x 9.0 | 23.50 | 43 | 9 | 6 | |
| 125 x 125 x 4.0 | 14.80 | 67.7 | 12 | 9 | |
| 125 x 125 x 5.0 | 18.20 | 55.0 | 12 | 9 | |
| 125 x 125 x 6.0 | 21.40 | 46.6 | 9 | 6 | |
| 125 x 125 x 9.0 | 30.60 | 32.7 | 8 | 4 | |
| 150 x 150 x 5.0 | 22.10 | 33.4 | 9 | 6 | |
| 150 x 150 x 6.0 | 26.20 | 28.1 | 6 | 6 | |
| 150 x 150 x 9.0 | 37.70 | 19.3 | 6 | 4 | |
| 200 x 200 x 5.0 | 29.90 | 33.4 | 6 | 4 | |
| 200 x 200 x 6.0 | 35.60 | 28.1 | 4 | 4 | |
| Rectangular Hollow Sections | |||||
| Size (mm x mm x mm) | Mass (kg/m) | Metres Per Tonne | Length / Pack | ||
| Standard | |||||
| 6.0 | 9.0 | 12.0 | |||
| 50 x 20 x 1.6 | 1.63 | 615 | 96 | ||
| 50 x 20 x 2.0 | 1.99 | 502 | 96 | ||
| 50 x 20 x 2.5 | 2.42 | 412 | 72 | ||
| 50 x 20 x 3.0 | 2.83 | 353 | 72 | ||
| 50 x 25 x 1.6 | 1.75 | 571 | 96 | ||
| 50 x 25 x 2.0 | 2.15 | 465 | 96 | ||
| 50 x 25 x 2.5 | 2.62 | 382 | 72 | ||
| 50 x 25 x 3.0 | 3.07 | 326 | 60 | ||
| 65 x 35 x 2.0 | 2.93 | 341 | 54 | ||
| 65 x 35 x 2.5 | 3.60 | 278 | 54 | ||
| 65 x 35 x 3.0 | 4.25 | 236 | 45 | ||
| 65 x 35 x 4.0 | 5.35 | 187 | 45 | ||
| 75 x 25 x 1.6 | 2.38 | 420 | 65 | ||
| 75 x 25 x 2.0 | 2.93 | 341 | 65 | ||
| 75 x 25 x 2.5 | 3.60 | 278 | 48 | ||
| 75 x 50 x 1.6 | 3.01 | 332 | 54 | 54 | |
| 75 x 50 x 2.0 | 3.72 | 269 | 42 | 42 | |
| 75 x 50 x 2.5 | 4.58 | 218 | 42 | ||
| 75 x 50 x 3.0 | 5.42 | 184 | 35 | 24 | |
| 75 x 50 x 4.0 | 6.92 | 145 | 28 | 24 | |
| 75 x 50 x 5.0 | 8.35 | 120 | 24 | ||
| 75 x 50 x 6.0 | 9.67 | 103 | 20 | 16 | |
| 76 x 38 x 2.5 | 4.15 | 241 | 45 | ||
| 76 x 38 x 3.0 | 4.90 | 204 | 40 | ||
| 76 x 38 x 4.0 | 6.23 | 161 | 32 | ||
| 100 x 50 x 1.6 | 3.64 | 275 | 32 | 32 | |
| 100 x 50 x 2.0 | 4.50 | 222 | 32 | 32 | |
| 100 x 50 x 2.5 | 5.56 | 180 | 32 | 24 | |
| 100 x 50 x 3.0 | 6.60 | 152 | 32 | 24 | |
| 100 x 50 x 3.5 | 7.53 | 133 | 24 | 18 | |
| 100 x 50 x 4.0 | 8.49 | 118 | 24 | 18 | |
| 100 x 50 x 5.0 | 10.30 | 97 | 18 | 15 | |
| 100 x 50 x 6.0 | 12.00 | 83 | 15 | 12 | |
| 102 x 76 x 3.5 | 9.07 | 110 | 20 | ||
| 102 x 76 x 5.0 | 12.50 | 80 | 16 | ||
| 102 x 76 x 6.0 | 14.70 | 68 | 12 | ||
| 125 x 75 x 2.0 | 6.07 | 165 | 24 | ||
| 125 x 75 x 2.5 | 7.53 | 133 | 24 | 20 | |
| 125 x 75 x 3.0 | 8.96 | 112 | 20 | 20 | |
| 125 x 75 x 4.0 | 11.60 | 86 | 15 | 15 | |
| 125 x 75 x 5.0 | 14.20 | 70 | 15 | 12 | |
| 125 x 75 x 6.0 | 16.70 | 60 | 12 | 6 | |
| 127 x 51 x 3.5 | 9.07 | 110 | 21 | ||
| 127 x 51 x 5.0 | 12.50 | 80 | 18 | ||
| 127 x 51 x 6.0 | 14.70 | 68 | 14 | ||
| 150 x 50 x 2.0 | 6.07 | 165 | 21 | 21 | |
| 150 x 50 x 2.5 | 7.53 | 133 | 24 | ||
| 150 x 50 x 3.0 | 8.96 | 112 | 21 | 15 | |
| 150 x 50 x 4.0 | 11.60 | 86 | 15 | 15 | |
| 150 x 50 x 5.0 | 14.20 | 70 | 15 | 9 | |
| 150 x 100 x 4.0 | 14.80 | 68 | 12 | 9 | |
| 150 x 100 x 5.0 | 18.20 | 55 | 12 | 8 | |
| 150 x 100 x 6.0 | 21.40 | 47 | 9 | 6 | |
| 150 x 100 x 8.0 | 27.70 | 36 | 6 | 4 | |
| 150 x 100 x 9.0 | 30.60 | 33 | 6 | 4 | |
| 150 x 100 x 10.0 | 33.40 | 30 | 4 | ||
| 152 x 76 x 5.0 | 16.40 | 61 | 12 | 12 | |
| 152 x 76 x 6.0 | 19.40 | 52 | 9 | 9 | |
| 200 x 100 x 4.0 | 17.90 | 56 | 8 | 6 | |
| 200 x 100 x 5.0 | 22.10 | 45 | 8 | 6 | |
| 200 x 100 x 6.0 | 26.20 | 38 | 8 | 4 | |
| 200 x 100 x 8.0 | 33.90 | 30 | 6 | 4 | |
| 200 x 100 x 9.0 | 37.70 | 27 | 6 | 4 | |
| 200 x 100 x 10.0 | 41.30 | 24 | 2 | ||
| 300 x 200 x 8.0 | 59.10 | 17 | 2 | ||
| 300 x 200 x 10.0 | 72.70 | 14 | 2 | ||